Skip to main content
Prefab Home Prices in Europe: The 2026 Guide
Pricing

Prefab Home Prices in Europe: The 2026 Guide

AB
Andreea B.
Client Experience Lead
Updated October 2, 2026
11 min read

In 2026, German prefab portals put a turnkey prefab home at about €2,400-€3,300 per m² of living area (musterhaus.net), with a median around €2,800/m² (fertighaus.de). BioBuilds publishes its list prices including an illustrative 19% German VAT, excluding land, transport and site costs: from €78,000 for the 48 m² Wanderlust (Exterior Finished) to €458,000 for the 190 m² Bloom turnkey, with a Passivhaus-certified building system at every size. This guide breaks down the real numbers: per model, per finish level, per country.

This guide gives you published prices and explains exactly what they include and exclude, so you can compare any offer you receive, whether from us or another manufacturer.

One definition before the prices: this article covers the price of the house itself. Land, foundation, unloading, utility connections, and permits sit outside the BioBuilds module price. A per-model summary of those costs appears near the end of this guide.

How much does a prefab home cost per square meter in 2026?

One scope note first: based on our analysis, buyers in 2026 should focus on prefab homes with a timber frame and energy certification. The two linked guides explain why; this one uses those criteria as its baseline and analyzes prices in that segment.

For BioBuilds, the current price ranges by finish are shown below (including an illustrative 19% German VAT). Areas and €/m² figures use nominal exterior model areas, not usable interior areas.

€1,305–1,625/m²
BioBuilds Exterior Finished; ventilation optional
€2,411–2,667/m²
BioBuilds Turnkey
varies
BioBuilds site costs are additional and depend on plot and scope

For German market context, fertighaus.de reports a 2026 median of about €2,800/m² for turnkey prefab homes; musterhaus.net gives €2,400-€3,300/m² of living area. These figures are not directly comparable with BioBuilds' prices per nominal exterior square meter. Check the area definition, VAT basis and included work before comparing.

BioBuilds, the European manufacturer publishing this guide, publishes turnkey list prices from €2,411/m² to €2,667/m², depending on model size. Every model uses the same Passivhaus-certified system: 35 cm C24 timber-frame walls, STEICO wood-fiber insulation, triple-glazed windows with Passivhaus-certified frames, and MVHR ventilation with heat recovery included in Turnkey and optional in Exterior Finished.

Key Takeaway

Per-square-meter price only means something at the same finish level and certification level. A semi-finished envelope built on BioBuilds' Passivhaus-certified building system and a turnkey code-minimum house are not cheaper and more expensive versions of the same thing; they are different products.

Published prefab home prices by model (02.10.2026)

These are the current BioBuilds list prices, including an illustrative 19% German VAT and excluding transport. Irish storefront prices use a separate, transport-inclusive price list. The buyer arranges unloading, crane provision and utility connections. On-site assembly is arranged by the client with BioBuilds' local partners at no extra cost. The online configurator uses the same price data and VAT basis. Before you sign, the personalized offer confirms the configured estimate as a final gross price; the contract then holds that price firm.

Wanderlust 48 m²
Wanderlust 48 m²
Serenity 95 m²
Serenity 95 m²
Sanctuary 142 m²
Sanctuary 142 m²

Exterior Finished has a fully finished exterior. Electrical cables and conduits are factory-installed and included as standard. Plumbing and electrical panel installation are preselected, included in the Exterior Finished prices below and removable. Ventilation equipment, ducts and installation form one optional upgrade. Turnkey includes all three installations. Bathroom waterproofing remains standard without plumbing.

ModelSizeExterior FinishedTurnkeyTurnkey €/m²
Wanderlust48 m²from €78,000from €128,000€2,667
Serenity95 m²from €138,000from €248,000€2,611
Sanctuary142 m²from €198,000from €358,000€2,521
Bloom190 m²from €248,000from €458,000€2,411

Two patterns worth noticing. First, the per-square-meter price falls as the house grows: a 142 m² Sanctuary costs less per m² than a 48 m² Wanderlust. Second, the Turnkey premium over Exterior Finished runs €50,000–€210,000 depending on size; what that buys is itemized in the next section.

Prices current as of 02.10.2026, including an illustrative 19% German VAT. Check the configurator for today's figures.

Exterior Finished vs Turnkey: what each price contains

Every BioBuilds home, at either finish level, arrives with the complete envelope of the Passivhaus-certified building system. The differences are the interior finishes and the selected installations.

Exterior Finished: OSB surfaces, ready for direct finishing
Exterior Finished: OSB surfaces, ready for direct finishing
Turnkey: the same model, finished and furnished-ready
Turnkey: the same model, finished and furnished-ready
Exterior Finished: standard scope and options
  • Complete structural system: 35 cm C24 FSC-certified timber-frame walls
  • Full STEICO wood-fiber insulation and airtight membrane system
  • Exterior cladding (Yakisugi charred timber or Lunawood thermowood)
  • Triple-glazed windows with Passivhaus-certified frames, installed
  • Ventilation equipment, ducts and installation: optional package, €9,400–€29,400
  • Electrical cables and conduits: factory-installed, included as standard
  • Electrical panel installation: removable upgrade
  • In-wall plumbing: removable upgrade; bathroom waterproofing stays standard
  • Interior surfaces in OSB made with no-added-formaldehyde resin, ready for direct finishing

BioBuilds' Exterior Finished is not a bare shell. Alongside any installations not selected, the remaining owner work includes finishing surfaces: paint or panel the walls, bond the parquet, fit light fixtures and outlet covers. These finishes do not require an additional drywall layer.

Turnkey adds the finished interior: Unilin wood panel or felt wall finishes, flooring installed, complete bathrooms with fittings, kitchen installations ready for your cabinetry and appliances, interior doors, lighting, and Zehnder MVHR and a Samsung WindFree or Panasonic heat pump installed. Once site work, utility connections and any required approvals are complete, you can move in.

For a deeper comparison, see the pages on turnkey prefab homes and semi-finished prefab homes.

What affects the price of a prefab home

Four factors affect the final contract figure:

  1. Size. Larger BioBuilds models cost less per nominal exterior square meter, as the table above shows.
  2. Finish level. The BioBuilds turnkey premium is €50,000–€210,000, depending on the model, for the additional finishes and installations described above.
  3. Configuration choices. Cladding type, glazing extents, interior packages. The configurator updates these prices in real time, so you see the cost of every choice before the offer stage.
  4. Destination. Irish storefront prices include transport. For Germany, Austria and Romania, a transport estimate is added after you enter the delivery country and a valid postcode. Other destinations require a separate quote.
BioBuilds: around 3 weeks of factory production for a standard model under standard conditions
BioBuilds: around 3 weeks of factory production for a standard model under standard conditions
Transport quoted by destination
Transport quoted by destination

The list prices are public; the personalized offer confirms your final price, and the signed contract sets the applicable terms.

Budget tiers: what each budget buys in 2026

House price (including an illustrative 19% German VAT)What it buysHouse plus starting site estimate
€78,000-€128,000Wanderlust 48 m² Exterior Finished or TurnkeyExterior Finished from €110,400; Turnkey from €160,400
€138,000-€248,000Serenity 95 m² Exterior Finished or TurnkeyExterior Finished from €187,100; Turnkey from €297,100
€198,000-€358,000Sanctuary 142 m² Exterior Finished or TurnkeyExterior Finished from €258,300; Turnkey from €418,300

The right-hand column adds BioBuilds' starting site-cost estimate from the next section to each finish price. Land, transport, selected upgrades, any remaining interior work and taxes not already included are additional; obtain project-specific quotes before arranging finance.

The costs outside the house price

We itemize these fully in the site-cost guide and the foundation guide; here is the summary. BioBuilds' module prices exclude land. How much these add depends on your plot and on how much you delegate. BioBuilds' starting site-cost estimates are shown below (including an illustrative 19% German VAT):

ModelSite & permit costs
Wanderlust 48 m²from €32,400
Serenity 95 m²from €49,100
Sanctuary 142 m²from €60,300

The guide lists surveyor, geotechnical report, architect, permit fees, structural calculations, energy consultant, ground-screw foundations, crane, utility hookups and contingency, as well as kitchen and terrace allowances. The required items and their costs depend on the plot and local requirements. Use project-specific quotes to establish your budget.

from €32,400
BioBuilds starting site-cost estimate for Wanderlust; including an illustrative 19% German VAT
BioBuilds cost planning data, 2026

VAT and country notes

The BioBuilds figures in this guide are shown including an illustrative 19% German VAT. The standard VAT rates below apply where the relevant supply is taxable at that rate; site services and public fees need separate tax treatment:

  • Germany: 19%
  • Austria: 20%
  • Romania: 21%

Germany's KfW 297/298 programme offers subsidized loans of up to €150,000 per housing unit at the QNG funding level. This requires QNG certification and project assessment by energy-efficiency and sustainability specialists. A Passivhaus-certified building system alone does not establish eligibility.

Running costs of a prefab home

Purchase price is a one-time number; heating bills repeat for decades. BioBuilds homes use a Passivhaus-certified building system. The Passivhaus annual space-heating-demand criterion is at most 15 kWh/m² of treated floor area per year; system certification does not guarantee a completed home's demand. Actual performance and savings depend on the project, climate, heating system, use and energy prices. Our Passivhaus ROI guide discusses the calculation, and the savings calculator gives an illustration using stated assumptions.

For a manufacturer-by-manufacturer market comparison across price tiers, see How Much Does a Modular Home Cost in 2026?. That guide provides a market comparison; this one answers a narrower question: what does the house itself cost according to the published price list?

Frequently Asked Questions

The figures here are BioBuilds prices including an illustrative 19% German VAT, excluding land, transport and site costs. BioBuilds publishes list prices from €78,000 (Wanderlust 48 m², Exterior Finished) to €458,000 (Bloom 190 m², turnkey), which works out to €2,411/m²-€2,667/m² turnkey with a Passivhaus-certified building system.
Add the house price to the plot-specific costs. BioBuilds' site-cost estimates start from €32,400 for Wanderlust and from €60,300 for Sanctuary (including an illustrative 19% German VAT). These are site-cost estimates, not totals for the house and plot. Land, transport, selected extras, remaining interior work and taxes not already included are additional.
BioBuilds' larger models cost less per nominal exterior square meter, as the published price table shows. Bathrooms and technical systems do not have identical costs across models. Kitchen furniture and appliances are not included. The Wanderlust costs €2,667/m² turnkey while the Bloom costs €2,411/m².
If you can do finish work such as painting, laying parquet, and fitting fixtures, yes: the envelope of BioBuilds' Passivhaus-certified building system and the windows arrive complete, with electrical cables and conduits included as standard and plumbing and electrical panel installation available as removable upgrades. You save €50,000–€210,000 depending on model. The Zehnder MVHR and heat-pump package, including ducts and installation, is a separately priced upgrade. Interior finishing and final fittings complete the home. If you want to move in with the least work, turnkey is the right product; site work, connections and any required approvals come first.
BioBuilds list prices in this guide are shown including an illustrative 19% German VAT. The standard VAT rates are 19% in Germany, 20% in Austria and 21% in Romania; the applicable treatment of each site-cost item must be checked separately. Germany's KfW 297/298 loans require project-specific eligibility; the QNG level also requires sustainability certification.
AB
Andreea B.
Client Experience Lead
Certified Passive House Consultant with 8 years experience in timber-frame construction and prefabricated housing. Helping families across Europe build smarter, healthier homes.

Ready to build your Passivhaus?

Configure your modular home online and get an instant price estimate.

Configure your home